0.18 to 4 kW (0.25 to 5 hp)
1Φ 100 & 200 V, 3Φ 200 & 400

Making simple applications, simple

Take charge of motor control and energy savings with the latest addition to the Control Techniques portfolio. With a feature set optimised for simple applications, Commander S provides a cost-effective solution for installations that require plug and play convenience straight from the box.

Commander S is the first drive to come with an app interface as a standard feature. The Marshal app is our revolutionary way to interface with the drive covering commissioning, monitoring, diagnostics and support.

Marshal: your drive expert in the field

Control Techniques has a long tradition of challenging the status-quo with innovative ideas and making a profound impact in the drives industry. And we've done it again with Marshal: Control Techniques is the 1st drive supplier to implement NFC technology as standard on a drive and offer the Marshal app interface at no extra cost.

Marshal is your drive expert in the field. This rich content interface means you can commission, clone, diagnose system issues and monitor the drive in just a few screen taps.

General Purpose Drives

0.25 kW - 132 kW (0.33 hp to 200 hp)
100 V | 200 V | 400 V | 575 V | 690 V

Flexibility For Countless Applications

Commander C combines efficiency and reliability to offer optimum performance for a wide range of applications. With many essential features built in, including PLC capabilities for simple programming needs, dual STO safety function, braking transistor and PID control, it provides a compact solution for any installation.

Freestanding Drives

55 kW to 540 kW
400 V | 690 V

Ready To Use High Power Cubicle Drives

For many drive users, designing and building a high power drive cubicle requires extensive in house engineering expertise that they do not have.

The DFS Drive is a pre-assembled, ready to install drive cubicle system designed for use in high power applications where energy saving and high ingress protection are key. With fast, easy installation, plant availability is maximised with virtually zero requirement from your engineering resource.

High Performance AC/Servo Drives

0.75 kW – 2.8 MW (1.0 - 4,200 hp)
200 V / 400 V / 575 V / 690 V

The Ultimate Universal Drive

Our Unidrive M700 drives offer the highest control stability and bandwidth for every industrial motor type.

Unidrive M enables maximum machine throughput in every application and with every motor, from AC induction motors to dynamic linear motors and from energy saving hybrid permanent-magnet motors to high performance servo motors.

High Performance AC Drives

0.75 kW – 2.8 MW (1.0 - 4,200 hp)
200 V / 400 V / 575 V / 690 V

High performance drive for open-loop control of induction, permanent-magnet, and hybrid PM motors

The M600 is the perfect choice for applications that require high performance open-loop control of induction or permanent magnet motors.

A comprehensive range of option modules are available for easy integration into all major fieldbus ecosystems and to tailor the drive to any application need.

High Performance Drives

0.25 - 132 kW (0.33 - 200 hp)
100 V | 200 V | 400 V | 575 V | 690

Optimised throughput and energy efficiency in industrial applications

Unidrive M400 is exceptional at combining the ease of use of our general purpose range with the capabilities of our high performance Unidrive M Series.

Add in an impressive I/O count, dual Safe Torque Off (STO) and integrated PLC, all of which contribute to making the M400 an extremely capable drive.

Specialist Drives

0 – 3,000 Hz Open Loop
0.25 kW – 7.5 kW (0.33 hp – 10 hp)
200 V / 400 V

Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.

Specialist Drives

0 - 3,000 Hz Open Loop
0 - 1,250 Hz Closed Loop
0.75 kW – 2.8 MW (1.0 - 4,200 hp)
200 V / 400 V / 575 V / 690 V

Unidrive HS70 provides maximum control of high speed motors and incorporates an onboard Advanced Motion Controller and onboard PLC.

Specialist Drives

1.1 kW to 2.8 MW
(1.5 hp to 4,200 hp)
200 V / 400 V / 575 V / 690 V

Simple, reliable flow control

Applications involving the flow of water demand extreme reliability and low energy consumption. Available in IP20 and IP65 packages, Control Techniques’ F600 drive, part of the newly introduced Specialist series of industry-specific drive technologies, builds on our company’s five decades of drives expertise, delivering precise, dependable flow control.

Everything you need is baked into the drive itself. The F600 packs all of the features you’ll need, presented using terminology you’ll understand. This isn’t a generic drive with pump features tacked on; it’s a dedicated, specialist pump drive, designed from the ground up to deliver the reliability and efficiency you need.

Outstanding control performance and superior adaptability

0.4KW - 900kW
0 - 550Hz

NE Drive Highlights

- Simple, Reliable, Easy
- Outstanding control performance
- Superior Adaptability
- Optimise EMC design, immunity for high interference environment
- Compact design, based on thermal simulation & design to reduce product size
- Excellent Price/Performance Ratio

Specialist Drives

1.1 kW – 2.8 MW (1.5 - 4,200 hp)
200 V / 400 V / 575 V / 690 V

Powerdrive F300 AC variable speed drive is designed to control all AC induction motors and sensorless permanent magnet motors on the market. Even greater performance and energy efficiency savings can be achieved with our Dyneo® package which includes the Powerdrive F300 and the LSRPM permanent magnet motor.

High power modular drives

Powerdrive F300’s modular offering gives you never before seen flexibility in building compact, reliable high-power solutions. Paralleled together, Powerdrive F300 can control asynchronous and synchronous motors up to 2.8 MW (4,200 hp). At the top of the modular drives range, the Frame 12 is a 500 kW (700 hp) single module that delivers unmatched power density, while keeping both footprint and system costs to a minimum. The modules can be paralleled together into a wide range of flexible solutions to solve all system needs, including Active Front End and multi-pulse rectifier configurations.

Efficient system build

Designing and building a high power drive cubicle takes immense engineering knowhow. Most people don’t have that expertise in-house, but we do. And we’ve put it all into our DFS freestanding drives. The cubicle system is designed to make the most of our high power modular drives, benefiting the applications that need them the most. The results are maximum energy efficiency in an ingress protected package. Our cubicle drives come pre-assembled, easy to set up, with all necessary system components included. Furthermore, we can ship your Freestanding drive to you with a very short lead time, saving weeks on typical industry standards.

Specialist Drives

2.2 kW – 250 kW (3 - 400 hp)
200 V | 400 V | 575 V | 690 V

Dedicated Drives For Class-Leading Ride Comfort

Control Techniques is a leading supplier of variable speed drive technology to the elevator industry, with over 3 million elevators in operation with our control equipment worldwide. Backed by our global network of Drive Centres we provide local expertise and support, along with quick delivery of robust and dependable products.

Our elevator drive solutions work for any size of building. Whether it’s a small residential building or a luxury high rise, new build or modernization projects, we make every step of the process as easy as possible from product selection to installation, setup and service.